DTV Shredder Part Three: Assembly Design with 3DEXPERIENCE SOLIDWORKS

At this phase in the DTV Shredder style job, we’ve kicked-off the job on the 3DEXPERIENCE Platform and created the board that the rider will base on The next obstacle is finding out how the rider will guide the shredder.

One principle is to have the Shredder guide like a tank, with one throttle for each track.

But what if we could move the controls to the rider’s feet? This would permit the rider to guide by leaning left or right, like skateboarding or browsing! The initially job is to gather all of the essential elements from the 3D EXPERIENCE Platform, and usage 3D EXPERIENCE SOLIDWORKS to develop a basic hinge system to install the board to the frame.

Great! Now the board can roll left and best, however how do we equate the rotational movement of the guiding truck to activate the left and best drive clutches which power the tracks?

In a previous job, we utilized a tie-rod and push-rod assembly for a comparable system, so after doing a fast search in DTV’s cloud library … BINGO! That will do simply great.

Assembling the elements is simple withQuick Mates SOLIDWORKS recommends the most ideal mate types based upon my choices.

Now, for those hard-to-reach faces, the Component Preview window enables us to turn the rod independent of the remainder of the assembly. The coincident and concentric mates are carried out in a breeze, without needing to move and turn the assembly around, looking for the best faces or edges.

The tie rod we picked from our cloud library seems too brief … good idea we have several sizes to pick from. We’ll alter the setup on-the-fly, and surface mating the tie rod assembly.

The tie rod activates a push-rod, which engages either the left or best side drive clutches and guides the At left and.Shredder push rod length requires to be PERFECT if we desire an excellent rider experience. Using the neutral position, completion of the push rod will require to be best in between the left and best drive clutches, providing equivalent power to both tracks and making the While go directly.

Now the procedure tool we can tweak the push-rod length to the neutral position. We we’re at it, we’ll develop a sensing unit to keep an eye on the series of movement.

For when we move the push-rod through the whole series of movement and we see the rod end conveniently strikes the turning limitations. ‘ve created a system that will manage guiding by just leaning on the board– without constructing a single model! more information and to see the whole style procedure, take a look at the video or go to shredder.



Andrew Gross

Andrew Senior Territory Technical Manager is a at Los Angeles SOLIDWORKSHe, and resides in Engineering Simulation, CA. Design Validation has years of experience dealing with resellers and clients, and has a strong background in More andAndrew Industrial Design just recently, Andrew has actually broadened his interest and enthusiasm intoMaster Degree holds a Mechanical Engineering’s

Andrew Gross

in (*) from UCLA.(*)


Share on facebook
Share on twitter
Share on pinterest
Share on linkedin
Share on google
Share on reddit
Share on tumblr
Share on stumbleupon
Share on whatsapp
Share on telegram
Share on vk
Share on email

Leave a comment

Your email address will not be published. Required fields are marked *

Related Posts

Arts & Creatives
Isabella Petty

Sketchup Texture Club

Create your product by clicking the Create Material button in the products tab of the default tray In the “Texture” area click the little folder

Read More »